Land Rover 300tdi engine conversion kit
Your Land Rover details
The kits are supplied to suit all the 90/110 versions. If you order a kit, you will need the following information to make sure the correct one is supplied.
-
Is it a 90 or 110? The exhaust systems are different.
-
Do you have power steering? If not, we supply a shorter serpentine belt, as the 300tdi power steering pump and pulley have to be removed.
-
Is the steering wheel on the left hand side or the right hand side? This decides which power steering hose to supply (if PAS) and also if the turbo wastegate clevis needs changing.
-
What is the approximate diameter of the coolant expansion tank outlet? We supply an extension reducer and hose to the coolant bottom hose. The early tanks are 25mm (1") and the later ones are 19mm (3/4") - measure the tank outlet - not the outside hose diameter.
-
Are the heater outlets vertical or horizontal? Original heater outlets are vertical, but the later heater with horizontal outlets may have been fitted. This determines which heater hoses to supply.
Please note
Although all the 300tdi engines will fit - the 'fly by wire' injection pump ERR3336 (usually from an automatic Discovery) cannot be connected to the 90/110 throttle cable. This pump will need changing for a manual type.
The 'automatic' flywheel is not a problem, as you can fit your original 2.5D/TD flywheel to the 'automatic' motor.